Amplifiers
Croft Series 7 Power Amplifier
The Croft Series 7 power amplifier is Croft`s ”entry-level” power amp but quite honestly there are only a minority of manufacturers in the market who are capable of producing amplifiers that are this good regardless of price. A hybrid design which uses 1 x ECC83 valve for the input stage and high quality Mosfets for the output. Producing a potent 45-50w rms and very stable driving difficult speaker loads.
The Croft Series 7 has been universally well-received by dealers, distributers and customers. If you are looking for an outstanding performer at a reasonable price point then this is the power amplifier for you.
More Details
Stats and Specs
DIMENSIONS: W - 405mm D - 270 mm H - 70mm
VALVE COMPLEMENT: 1 x ECC83
WEIGHT: 5 kg
FREQUENCY RESPONSE: 0.15 Hz - 150kHz -1 dB
SENSITIVITY: 0.5V rms for 45W output @ 8Ω
INPUT IMPEDANCE: 470 kΩ
POWER OUTPUT: 45 W rms @ 8Ω 50 W rms @ 4Ω
POWER CONSUMPTION: 20 W idle 240 W max
Goldenote - S1
The newest S-1 series Dual-Mono is the entry level solid state stereo integrated amplifier using a proprietary Mirror-Amp™ electronic design, enabling the preamplifier section to work as a superior class A amplifier.
The Mirror-Amp™ is a gain stage made with a proprietary cascade differential amplifier with a mirror current, producing a super-linear signal, thus virtually eliminating distortion.
The power supply is handled by two different custom made transformers. The two transformers are dedicated to the audio signal, while an internal galvanically insulated power section controls all the functions that could adversary affect the sound of the amplifier, such as the motorised volume control, the checking relays, the power ON led light and even the micro-chip used for some electro-mechanical functions.
The S-1 does not have active or passive filters on the audio signal path.
More Details
We designed four thermal switches to turn off the amplifier power when it reaches an internal temperature of 80°Celsius (180°Fahrenheit). This feature, while preventing, dangerous operating conditions also enables the amplifier to achieve the very best sonic performance.
The S-1 has a wide inductive and resistance acceptance so it can be matched with a very wide range of audio cables.
The S-1 chassis is made of Steel to minimize RFI and EMI interference.
Features:
POWER OUTPUT: 40w+40w 20-20.000Hz (Standard)
FREQUENCY RESPONSE: 20Hz - 20KHz @ +/- 3dB
SIGNAL/NOISE RATIO: -90dB
THD (Total Harmonic Distortion): 0,2% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47Kohm
PHONO INPUT IMPEDENCE (optional): 47Kohm MM o 470ohm MC
INPUT SENSIVITY: 550 mV
SLEW RATE: 13 Volt Line
INPUT/OUTPUT: 5 Line + 1 Phono (optional) + 1 fix output
POWER TRANSFORMERS: 2 Audio Power E core customized (Standard)
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 430mm L x 90mm H x 350mm D
WEIGHT: Kg. 10,00 (22lbs.)
Goldenote - S1 Signature
The S-1 Signature amplifier is the special edition of S-1 amplifier. It features high grade components and matched HQ transistors thus increase the quality of the standard version. A renewed power supply also increase the power of the S-1
Signature up to 60watt RMS per channel.
More Details
Features:
POWER OUTPUT: 60w+60w @ 20-20.000Hz
FREQUENCY RESPONSE: 20Hz - 20KHz @ +/- 3dB
SIGNAL/NOISE RATIO: -90dB
THD (Total Harmonic Distortion): 0,2% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47Kohm
PHONO INPUT IMPEDENCE (optional): 47Kohm MM o 470ohm MC
INPUT SENSIVITY: 550 mV
SLEW RATE: 13 Volt Line
INPUT/OUTPUT: 5 Line + 1 Phono (optional) + 1 fix output
POWER TRANSFORMERS: 2 AUDIO Power Toroidal custom + 1 controlling
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 430mm L x 90mm H x 350mm D
WEIGHT: Kg. 10,00 (22lbs.)
Croft Series 7 version "R" Power Amplifier
Pictured here with the matching Micro 25 version “R” pre-amplifier.
The power amp has a similar specification to the Polestar III from the EA range of two and a half years ago but with various circuit updates. Power output is 50-55 watts RMS into 8 ohms. It is a hybrid design with valves taking care of the 1st stage amplification and very high quality SS Mosfets delivering the output. Regulated HT with 300VA toroidal PSU.
More Details
Features and Specifications*
* 300VA toroidal power supply
* Reguated HT
* 50-55 Watt RMS into 8 ohm
* 75 Watt RMS into 4 ohm
* Dimensions H 70mm W 410mm D 225mm
* Specifications are intended as a rough guide and are subject to change
Transcription Audio - Cell Energy
I am confident to declare this amplifier one of the most cost effective products to deliver a true high-end sound on the market. The goal being to deliver musicality without spending a fortune. Having the advantage of knowing the marketplace, using experience gained comparing other well regarded products, I am confident we have achieved our aims.
Goldenote - S3
The S-3 is latest single ended Dual-Mono solid state stereo integrated amplifier that uses a proprietary Mirror-Amp™ electronic design, enabling the preamplifier section to work as a superior class A amplifier.
The Mirror-Amp™ is a gain stage made with a proprietary cascade differential amplifier with a mirror current, producing a super-linear signal, thus virtually eliminating distortion.
The power supply is handled by three custom made transformers. The two transformers are dedicated to the audio signal, while a smaller galvanically isolated one controls all the functions that could adversary affect the sound of the amplifier, such as the motorised volume control, the checking relays, the power ON led light and even the micro-chip used for electro-mechanical functions.
The S-3 does not have active or passive filters on the audio signal path. We designed four thermal switches to shut-off the amplifier power if it reaches an internal temperature over 80°Celsius (180°Fahrenheit). This feature, while preventing, dangerous operating conditions also enables the amplifier to achieve the very best sonic performance.
To ensure large power capability the S-3 features two precision low noise fans separately powered.
More Details
The fans render the amplifier cooler and more stable. The fan’s bearings are of a very low noise kind, but anyway, to avoid environment unwanted swishes they start working smoothly only when internal 50° Celsius (120°Fahrenheit ) are reached increasing the speed proportionally till 80°Celsius (180°Fahrenheit) when the amplifier shuts-off.
The S-3 has a wide inductive and resistance acceptance so it can be matched with a very wide range of audio cables.
The S-3 chassis is made of Steel to minimize RFI and EMI interference while all key components have tight tolerances.
Features:
POWER OUTPUT: 70w+70w @ 20-20.000Hz
FREQUENCY RESPONSE: 20Hz - 20KHz @ +/- 3dB
RATIO SIGNAL/NOISE: -90dB
THD (Total Harmonic Distortion): 0,2% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47Kohm
PHONO INPUT IMPEDENCE (optional): 47kohm MM or 470ohm MC
INPUT SENSIVITY: 550mV
SLEW RATE: 13μV
INPUT/OUTPUT : 5 Line + 1 Phono optional + 1 fix output
POWER TRANSFORMERS: 2 AUDIO Power E core customized + 1 controlling
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 430mm L x 90mm H x 350mm D
WEIGHT: Kg. 12,00 (26lbs.)
Blacknote - DSA 100
The DSA100 is a 100watt superior Class D digital amplifier designed to achieve audiophile performance at very high power rate.
Though the DSA100 has a full digital output stage the amplifier is powered by a traditional massive I.E. handcrafted transformer to ensure the highest quality controls in all the unit separated audio signal paths.
The DSA100 is an integrated amplifier able to deliver uncompromised sound quality with the typical great power and versatility of such innovative technology.
The DSA100 has the internal preamplifier and power amplifier stages separated can be singularly activated to set up double passive amplification audio systems having the max possible versatility and highest sound performance.
The preamplifier stage is controlled with a classical high quality ALPS volume control while the four different Line Inputs are powered thru electrical 24 Karat gold singularly incapsulated relays guarantee a full isolated line silence with zero negative feedback & crosstalk.
More Details
A proprietary Blacknote design enables real "Flat Load Independent-Frequency Response" design which allows perfect matching with any (hi-end) audio speaker of the market. The FLI-FR system apart of keeping the frequency response stable independently of the speaker load enable a perfect linear response down to remarkable 1ohm matching.
The very low output noise & impedance of the Blacknote DSA100 amplifier and super wide bandwidth insure top class performance with level of accuracy hard to reach with traditional amplifiers.
A fully remoted handset complete the unique features of one of the most innovative amplification system available today.
DSA100 Technical details:
* Digital Superior Class D Amplifier, Flat Load Independent Frequency Response design.
* Super Linear Power Supply Integrated amplifier design
* 2 X 100W Continuous Power at 8, 4, 2 & 1ohms
* Frequency Response 10Hz – 50KHz @ +/- 3dB
* <0.05% THD @ 20Hz-20KHz
* Output Impedance: 0,02ohm @ 1KHz
* Input Impedance: 47Kohm
* 100% stability at 1ohm speaker load working
* >350W IHF Dynamic Power
* >120dB Dynamic Range
* >400 Damping Factor
* 80uV max output noise
* 3 x RCA Single End Inputs
* 1 x XLR Balanced Inputs
* True Separate PREAMP OUTPUT stage – RCA OUT PINS Available for exclusive Preamp Functionality
* True Separate AMP IN stage - RCA IN PINS Available for exclusive Preamp Functionality (disables the remote functions)
* Audiophile ALPS remote volume control
* LCD switchable display
* Dimension: 240mm L x 120mm H x 400mm D (9.5” L x 4¾ ” H x 15¾ D)
* Weight: 15Kilos (33Lbs.)
* NOTES: The Flat Load Independent Frequency Response design allows perfect speaker matching and stable frequency response with all audio loudspeakers.
Goldenote - S3 Signature
The S-3 Signature amplifier is the special edition of S-3 amplifier. It features higher grade components and matched HQ transistors thus increase the quality of the standard version. A renewed power supply also increase the power of the S-3
Signature up to 100watt RMS per channel
More Details
Features:
POWER OUTPUT: 100w+100w @ 20-20.000Hz
FREQUENCY RESPONSE: 20Hz - 20KHz @ +/- 3dB
RATIO SIGNAL/NOISE: -90dB
THD (Total Harmonic Distortion): 0,2% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47Kohm
PHONO INPUT IMPEDENCE (optional): 47kohm MM or 470ohm MC
INPUT SENSIVITY: 550mV
SLEW RATE: 13μV
INPUT/OUTPUT : 5 Line + 1 Phono optional + 1 fix output
POWER TRANSFORMERS: 2 AUDIO Power E core customized + 1 controlling
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 430mm L x 90mm H x 350mm D
WEIGHT: Kg. 12,00 (26lbs.)
Blacknote - DSA 150
The DSA150 is a true 150watt superior Class D digital integrated amplifier designed to satisfy the most discerning audio enthusiasts. The DSA150 is able to deliver both uncompromised sound quality and great power thanks to its innovative technology.
The DSA150 has a full digital Class D output stage engineered in-house and powered by traditional massive dual-mono I.E. handcrafted transformers hence avoiding a switched mode power supply. Its effortless power ensures superb control of the audio signal paths.
More Details
The DSA150 has its internal preamplifier and power amplifier stages perfectly isolated. They can be separated and set up for double passive amplification audio systems for premium quality & sound performance. The preamplifier stage is controlled with a classic high quality ALPS volume control while six different line inputs, three RCA and three XLR are powered by 24 Karat gold encapsulated relays guaranteeing a fully isolated line silence with zero negative feedback & crosstalk.
A proprietary Blacknote design called "Flat Load Independent-Frequency Response" allows perfect matching with any (hi-end) audio speaker on the market. The FLI-FR system, apart from keeping the frequency response stable independent of the speaker load, enables a perfectly linear response down to a remarkable 1 ohm matching.
A real 150 watts per channel enables it to effectively drive almost all the speakers on the market, besides the very low output noise & impedance of the Blacknote DSA150 amplifier joined with super wide bandwidth insure top class performance with a level of accuracy very hard to reach with traditional amplifiers.
The DSA150 is fully remote controllable with a flat elegant handset completing one of the most innovative amplifiers available today.
DSA150 Technical Details:
* Digital Superior Class D Amplifier, Flat Load Independent Frequency Response design.
* Dual Mono Super Linear Power Supply Integrated amplifier design
* 2 X 150W Continuous Power at 8, 4, 2 & 1ohms
* Frequency Response 10Hz – 50KHz @ +/- 3dB
* <0.01% THD @ 20Hz-20KHz
* Output Impedance: 0,02ohm @ 1KHz
* Input Impedance: 47Kohm
* 100% stability at 1ohm speaker load working
* >350W IHF Dynamic Power
* >120dB Dynamic Range
* >400 Damping Factor
* 80uV max output noise
* 3 x RCA Single End Inputs
* 3 x XLR Balanced Inputs
* True Separate PREAMP OUTPUT stage – RCA OUT PINS Available for exclusive Preamp Functionality
* True Separate AMP IN stage - RCA IN PINS Available for exclusive Preamp Functionality (disables the remote functions)
* Audiophile ALPS remote volume control
* Giant LED On/Off switchable display
* Dimension: 430mm L x 145mm H x 390mm D (17” L x 5¾ ” H x 15 ½ D)
* Weight: 25Kilos (55Lbs.)
* NOTES: The Flat Load Independent Frequency Response design allows perfect speaker matching and stable frequency response with all audio loudspeakers.
Transcription Audio - 211 Heaven
A product made to order in small numbers. Single-ended amp built without compromise. C-core output transformers (not in image), copper chassis, U19 valve rectification and point to point flat silver wiring. 22w of power from the king of directly heated triodes
Goldenote - Demidoff
The Demidoff can be ordered in a standard version which has four AC power transformers but no inductive power supply.
More Details
Features:
POWER OUTPUT: 50w+50w @ 20-20.000Hz
FREQUENCY RESPONSE: 10Hz - 25KHz @ +/- 1dB
SIGNAL/NOISE RATIO: -98 db
THD (Total Harmonic Distortion): 0,3% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47kohm
INPUT SENSIVITY: 550mV
SLEW RATE: 13μV
INPUT/OUTPUT: 6 line + 1 fix Output
POWER TRANSFORMERS: 4 Audio Power E core customized + 1 controlling (Standard)
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 440mm L x 230mm H x 400mm D
WEIGHT: Kg. 28,00 (60lbs.)
NOTES: Fluorescent Vu-Meters on power output controlled by a separate transformer - OFC Copper RSC™ (Rectangular Solid
Bar) on the audio signal path.
Goldenote - Demidoff Signature
The Demidoff Signature is a single-ended Multi Transformer solid state stereo integrated amplifier.
As with all the Demidoff series, the Signature is 60% handcrafted to maximise performance in every single stage of the manufacturing process.
It uses the Bluenote proprietary Mirror-Amp™ pre-amp section which consists of a gain stage made with a special cascade differential amplifier employing a mirror current.
More Details
This configuration produces a super-linear signal, virtually eliminating distortion. The power supply is managed by 12 massive transformers specifically made for Goldenote. Four custom Golden transformers work as “pure” power energy suppliers while the remaining eight are decoupling transformers, mechanically isolated, designed to filter the DC power coming into the Mirror-Amp™ preamplifier section. Such massive inductive power supply guarantees the lowest interference from the AC power source.
All strategic power & audio sections are wired with RSC™ bars (Rectangular Solid Copper bars). The RSC™ bar is a 6mm wide by 0.5mm thick electrolytic 99.9999% OFC copper bar providing a super conductive rail with the lowest skin effect obtainable.
As with all Goldenote amplifiers the DEMIDOFF SIGNATURE does not have any active or passive filters or protective switches on the audio signal path. Instead, Bluenote designed specific passive thermal switches that shut off the amplifier power when the internal temperature reaches 80°Celsius (180°Fahrenheit). This offers protection for dangerous operating conditions and enables the amplifier to produce its best sonic performance.
The DEMIDOFF SIGNATURE amplifier is equipped with two high precision blue fluorescent Vu-Meters and a remote control for volume, both powered by a dedicated transformer to avoid any interference on the signal path that could affect the sound quality.
The chassis is completely made of high-mass aluminium to minimize RFI and EMI interference, thus ensuring completely non-magnetic casework.
The DEMIDOFF SIGNATURE supports a wide range of inductive and resistance loads so it can be matched with any kind of audio cable, allowing users to employ their favourite combination.
The extensive use of the very finest, custom built electronic components ensures the ultimate level of sonic performance.
As with all the Goldenote amplifiers the Demidoff Signature is equipped with Goldenote custom design connectors. The Signature in particular features high quality gold plated solid copper speaker connectors insulated through Teflon® washers and Bolts.
The DEMIDOFF SIGNATURE is the first Goldenote STATE OF THE ART amplifier.
Features:
POWER OUTPUT: 50w+50w @ 20-20.000Hz
FREQUENCY RESPONSE: 10Hz - 25KHz @ +/- 1dB
SIGNAL/NOISE RATIO: -102dB
THD (Total Harmonic Distortion): 0,2% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47kohm
INPUT SENSIVITY: 550mV
SLEW RATE: 13μV
INPUT/OUTPUT: 6 line + 1 fix Output
POWER TRANSFORMERS: 4 Audio Power E core customized
+ 8 Decoupling Power supply + 1 controlling Transformers
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 440mm L x 230mm H x 400mm D
WEIGHT: Kg. 40,00 (88lbs.) (Signature)
NOTES: Fluorescent Vu-Meters on power output controlled by a separate transformer - OFC Copper RSC™ (Rectangular Solid
Bar) on the audio signal path.
Goldenote - Silver Plus
The Demidoff Silver Plus is a single ended multi-transformer stereo integrated amplifier that is handcrafted to ensure the highest performance level.
The Demidoff Silver Plus uses the finest version of the Mirror-Amp™ pre-amp section. This gain stage is obtained using a proprietary special cascade differential amplifier with a mirror current, ensuring a super-linear signal virtually eliminating distortion. It also deploys a different output design than the other simpler Demidoffs, providing state of the art linearity and improved efficiency.
The power supply is managed by 12 massive custom-designed transformers. In order to ensure the best sonic performance, there is also a smaller transformer electrically isolated from the other ones that is dedicated to powering two separate circuit boards controlling the Vu-Meter`s fluorescent lights, the motor of the volume control, the internal protection relays and even the power ON led light.
More Details
Four custom Golden transformers work as “pure” power energy suppliers while eight are decoupling transformers, mechanically isolated, to filter the DC power entering the preamplifier Mirror-Amp™ section. Such a massive inductive power supply guarantees the lowest interferences from AC power.
All the strategic power & audio sections are wired with Rounded Solid Silver bars. The RSS is a 2mm diameter bar made with 92.5% pure silver and 7.5% electrolytic OFC. It provides the very best conductivity available.
The input wires are connected to the customised selector with a 2.5mm silver cable specifically made for this flagship Amplifier.
As per all the Demidoff amplifiers, the Demidoff Silver Plus does not have active nor passive filters on the audio signal. They have designed specific passive thermal switches to turn the amplifier power off completely when an internal temperature of over 80°Celsius (180°Fahrenheit) is reached.
Its chassis is completely made of high mass aluminium to minimize RFI and EMI interference through having completely non-magnetic paths.
The Demidoff Silver Plus has two high precision Blue Fluorescent Vu-Meters and a remote control for the volume, both powered by a dedicated transformer to avoid any kind of interferences on the signal path that could affect the sound quality.
The Demidoff Silver Plus supports a wide range of inductive and resistance loads so it can be matched with any kind of audio cable, allowing users to employ their favourite wiring combination. The use of the finest custom-built electronic components plus a totally new power supply cap section ensures supremely high levels of sonic performance.
As with all the Demidoff amplifiers the Demidoff Silver Plus is equipped with custom design connectors.
Features:
POWER OUTPUT: 75w+75w @ 20-20.000Hz
FREQUENCY RESPONSE: 10Hz - 25KHz @ +/- 1dB
SIGNAL/NOISE RATIO: -102dB
THD (Total Harmonic Distortion): 0,2% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47kohm
INPUT SENSIVITY: 550mV
SLEW RATE: 13μV
INPUT/OUTPUT: 6 line + 1 XLR Balanced Output + 1 fixed out
POWER TRANSFORMERS: 4 Audio Power E core customized
+8 Decoupling Power supply + 1 controlling Transformers
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: 440mm L x 230mm H x 400mm D
WEIGHT: Kg. 40,00 (88lbs.)s
NOTES: Fluorescent Vu-Meters on power output controlled by a
separate transformer - RRS™ (Rectangular Rounded Silver bar) on the audio signal path.
Goldenote - Demidoff Diamond
The Demidoff Diamond is a state of the art, two massive chassis solid state stereo integrated Amplifier providing high current combined with super high efficiency. It uses single ended `Multi-Powered` transformers, handcrafted to ensure the highest level of control in every stage of the circuit.
The Demidoff Diamond uses the very finest implementation of the Mirror-Amp™ pre-amp. This deploys a gain stage made with a proprietary cascade differential amplifier with a mirror current, providing a super-linear signal virtually eliminating distortion. The output section implements one further improvement to the Demidoff series. It has been modified to have the highest dynamic power, linearity and efficiency resulting in an unbelievably smooth sound performance.
More Details
The power supply, in a separate chassis, is managed by 18 massive transformers made specifically to a strict specification. Eight custom Golden transformers wired with silver alloy work as “pure” power energy suppliers. Another eight Transformers, mechanically isolated, are used as power decouplers filtering the DC power entering the preamplifier Mirror-Amp™ stage. Such a massive inductive power supply guarantees the lowest interference from AC power. All the strategic power & audio sections are wired with Rounded Solid Silver bars. The RSS is a 2mm diameter bar made with 92.5% pure silver and 7.5% electrolytic OFC. It provides the very best conductivity available.
The input wires are connected to the customised selector with a 2.5mm silver cable specifically made for this ultimate Amplifier. The dedicated audio section of the Demidoff Diamond is contained in a separate chassis specifically made for the audio signal only. The audio output stage is made with two RSS rails built around the proprietary active cryogenic refrigerator, the CRB™. The CRB™ allows the amplifier to work at a very low temperature producing the highest conductivity available acting as a virtual “super conductor”. As per all the Demidoff amplifiers, the Diamond does not have active nor passive filters on the audio signal. They have designed specific passive thermal switches to switch the amplifier power off completely if it reaches a critical power transistor temperature.
Its chassis is completely made of aluminium and stainless steel to minimize RFI and EMI interference through having a completely non-magnetic environment! The Demidoff Diamond has two high precision Blue Fluorescent Vu-Meters and a remote control for the volume, both powered by a dedicated transformer to avoid any kind of interferences on the signal path that could affect the sound quality. The Demidoff Diamond supports a wide range of inductive and resistance loads so it can be matched with any kind of audio cable, allowing users to employ their favourite wiring combination. The use of customised components matched with such an innovative separate power stage ensures a superior high level of sonic performance.
The Demidoff Diamond is equipped with all custom design connectors. It features high quality solid silver speaker connectors insulated through Teflon® washers and Bolts.
This Decade Edition Demidoff Diamond amplifier uses only the finest electronic components and represents the absolute STATE OF THE ART for 21st Century electronics design.
Features:
POWER OUTPUT: 100w+100w @ 20-20.000Hz
FREQUENCY RESPONSE: 5Hz - 30KHz @ +/- 1dB
SIGNAL/NOISE RATIO: -110dB
THD (Total Harmonic Distortion): 0,1% @ 20Hz - 20KHz
INPUT IMPEDENCE: 47kohm
INPUT SENSIVITY: 550mV
SLEW RATE: 13μV
INPUT/OUTPUT: 6 line + 1 XLR Balanced Output + 1 fixed out
POWER TRANSFORMERS: 8 Audio Power E core customized
+ 8 Decoupling Power supply + 1 controlling Transformers
MOTORISED VOLUME CONTROL: supplied
DIMENSIONS: Two chassis of 440mm L x 230mm H x 400mm D
TOTAL WEIGHT: Kg. 70,00 (150lbs.)
NOTES: Fluorescent Vu-Meters on power output controlled by a
separate transformer - RSS™ (Rounded Silver Bar) on the audio signal path. Solid Silver Speaker connectors